Material Families
Organized review paths across HTV, LSR, RTV, and specialty silicone categories.
Silicone Materials Directory
Enterprise Silicone Materials Directory for Cross-Border Sourcing Reviews
This directory presents an export-oriented material review path that helps procurement and technical teams align on application objectives, process boundaries, and delivery requirements, supporting efficient progression from initial screening to commercial inquiry coordination.
Category Breadth
Broad coverage across key silicone classes
Application-Fit Mapping
Selection aligned to end-use requirements
Documentation Support
Export documentation and compliance alignment
Application Scenarios
Structured around sealing, insulation, molding, and assembly performance requirements.
Inquiry Handling
Captures grade, process, and sample priorities through a disciplined intake framework.
Cross-Border Coordination
Integrates commercial terms, documentation handover, and delivery milestone communication.
Enterprise Review Layers
Export Sample
SI-240
Pilot requirement baseline
Material Review
SI-310
Process route comparison
Reference Indexing
Viscosity Window Notes
Curing Pathway Review
Packing & Export Docs
Reference Batch Mapping
Silicone Materials Directory System
Unified Enterprise Hub for Silicone Materials References
This page consolidates standard silicone references, molding-material catalog lines, and liquid-injection material directories into one structured consultation pathway for faster technical alignment and commercial decision support.
Directory-Only Reference (Non-Transactional)
Cross-Series Inquiry Mapping
Standardized Commercial Labels
Documentation Path Coordination
General Silicone
JZ-SRBaseline reference family for broad screening and first-round commercial matching.
Reference range
100 · 120 · 140 · 160 · 180 · 200
Sealing & Protection
JZ-SPCatalog line oriented to enclosure continuity and interface protection pathways.
Reference range
210 · 230 · 250 · 270 · 290 · 310
Molding Materials
JZ-MDUnified directory branch for compression and transfer molding inquiry flows.
Reference range
520 · 540 · 560 · 580 · 600
Liquid Injection
JZ-LIDirectory series for liquid-injection material discussions and process-route planning.
Reference range
610 · 630 · 650 · 670 · 690
Catalog Framework
Consistent card rhythm across all silicone directory branches
Supporting Blocks for Consistent Cross-Series Evaluation
Application Scope Mapping
Define use environment, interface conditions, and handling priorities before model-level comparison.
Series Path Selection
Route inquiries to SR, SP, MD, or LI branches based on processing method and end-use requirements.
Standardized Label Governance
Directory naming is aligned for clear technical and commercial communication across teams.
Documentation Coordination Workflow
Technical sheets, sample planning, and trade documentation requirements are confirmed during consultation.
Inquiry Gateway
Review Silicone Directory References, Then Initiate Inquiry
Begin by confirming the relevant SR, SP, MD, or LI directory pathway for your application scope. Then submit a qualified inquiry with target market and documentation requirements so our team can provide structured technical-review and commercial-follow-up guidance.
Directory Path Review First
Qualified Inquiry Submission
Datasheet & Sample Coordination
Compression Molding Directory
Silicone Rubber Materials for Compression Molding
This directory serves as a first-pass qualification tool for molding programs, helping teams screen candidate silicone grades, align application requirements, and prepare commercially focused consultation follow-up.
TL-8XX General Purpose Silicone Rubber
Silicone Rubber
Series: TL-8XX
General-purpose silicone rubber compound designed for molding parts. Translucent and easily pigmented.
Application cue: Molded rubber parts for electronic products
EXX Fumed Silica Grade Silicone Rubber
Silicone Rubber
Series: EXX
Translucent silicone rubber compound formulated for compression molding parts. Natural color and easily pigmented.
Application cue: Wire/cable, household, and automotive rubber parts
Platinum Cure Silicone Rubber
Silicone Rubber
Series: EXXP
Two-part platinum-catalyzed silicone rubber compound for extrusion or molding parts. High transparency and non-toxic formulation.
Application cue: Electronic, medical, bakeware, healthcare, kids, and food transfer products
Silicone Rubber for Automotive
Silicone Rubber
Series: TL-8607HT
Translucent silicone rubber compound formulated for heat ageing and oil resistance.
Application cue: Automotive diaphragms, O-rings, gaskets, seals, and hose parts
Medical Grade Silicone Rubber
Silicone Rubber
Series: EXXP
Two-part platinum-catalyzed silicone rubber compound designed for high-transparency extrusion or molding parts.
Application cue: Medical parts and healthcare products
Extrusion Grade EXX-EM
Silicone Rubber
Series: EXX-EM
Translucent silicone rubber compound formulated for compression molding and extrusion parts. Easily pigmented and food grade.
Application cue: Tubing, gaskets, and seals
Extrusion Grade TL-8XXEM
Silicone Rubber
Series: TL-8XXEM
General-purpose translucent silicone rubber compound formulated for extrusion parts and profiles. Easily pigmented.
Application cue: Wire/cable, household, and automotive rubber parts
Insulation Silicone Rubber
Silicone Rubber
Series: TL-9XX
High-voltage resistant silicone rubber compound formulated for good insulation in dielectric applications and molding parts.
Application cue: Electronic and electrical insulation parts
Wire Cable Silicone Rubber
Silicone Rubber
Series: TL-6703
Peroxide-curing silicone rubber formulated for silicone-insulated safety cables. Designed to maintain circuit integrity in case of fire.
Application cue: Silicone-insulated safety cables
FVMQ Fluorosilicone Rubber
Fluorosilicone Rubber
Series: FS-40 / FS-60
Fluorosilicone rubber compound with oil resistance and high resistance to cold solvents.
Application cue: Oil-resistant molded rubber parts
Flame Retardant Rubber UL 94V0
Silicone Rubber
Series: E55FR-W50 / E55FR-W65 / E55FR-W70
Flame-retardant silicone rubber compound formulated for extrusion or molding parts.
Application cue: Wire/cable, fire-resistant rubber, and electronic parts
LSR7XX Liquid Silicone Rubber
Liquid Silicone Rubber
Series: LSR7XX
High-flow liquid silicone rubber compound designed for injection molding parts. FDA and LFGB compliant formulation stated in the catalog.
Application cue: Automotive, household, and medical injection-molded parts
Use this directory to shortlist candidate compounds before technical and commercial engagement. Detailed formulation matching, test data interpretation, and qualification support are available during consultation. Request a materials advisor consultation.
Silicone Materials Directory
Liquid Injection Silicone Rubber (LSR) Catalog
Review validated LSR material lines to accelerate enterprise qualification, evaluate process windows, and align project-specific material selection before formal commercial engagement.
Liquid Silicone Rubber
Series TL-8XX
TL-8XX General Purpose Silicone Rubber
General-purpose silicone rubber compound for molding parts. Translucent material that can be easily pigmented. Typical uses include electronic and industrial rubber parts.
Application: molded parts
Liquid Silicone Rubber
Series EXX
EXX Fumed Silica Grade Silicone Rubber
Translucent silicone rubber compound for molding parts. Natural color and easily pigmented. Typical uses include wire and cable, household, and automotive rubber parts.
Application: molding parts
Liquid Silicone Rubber
Series EXXP
Platinum Cure Silicone Rubber
Two-part, platinum-catalyzed silicone rubber compound for extrusion or molding parts. High transparency, fast curing, and suited to electronic, medical, bakeware, healthcare, kids, and food transfer applications.
Application: extrusion and molding parts
Liquid Silicone Rubber
Series TL-8607HT
Silicone Rubber for Automotive
Translucent silicone rubber compound designed for heat aging and oil resistance. Recommended for automotive diaphragms, O-rings, gaskets, seals, and hose parts.
Application: automotive parts
Liquid Silicone Rubber
Series EXXP
Medical Grade Silicone Rubber
Two-part, platinum-catalyzed silicone rubber compound for extrusion or molding parts. High transparency and intended for electronic, medical, bakeware, healthcare, kids, and food transfer applications.
Application: medical and healthcare parts
Liquid Silicone Rubber
Series EXX-EM
Extrusion Grade EXX-EM
Translucent silicone rubber compound for compression molding and extrusion parts. Easily pigmented and positioned for wire and cable, household, and automotive uses.
Application: extrusion parts
Liquid Silicone Rubber
Series TL-8XXEM
Extrusion Grade TL-8XXEM
General-purpose translucent silicone rubber compound for extruding parts and profiles. Easily pigmented and described as anti-high-temperature, anti-aging, and resilient.
Application: extruded parts and profiles
Liquid Silicone Rubber
Series TL-9XX
Insulation Silicone Rubber
High-voltage resistant silicone rubber compound for dielectric insulation. Used for molding parts and rubber parts in the electronic and electrical industries, including resistors and related applications.
Application: electrical insulation
Liquid Silicone Rubber
Series TL-6703
Wire Cable Silicone Rubber
Peroxide-curing silicone rubber formulated for silicone-insulated safety cables. Designed to maintain circuit integrity in case of fire with good insulation resistance and mechanical stability.
Application: wire and cable insulation
Liquid Silicone Rubber
Series FS-40 / FS-60
FVMQ Fluorosilicone Rubber
Oil-resistant fluorosilicone rubber with strong resistance to cold and solvents. Available in FS-40 and FS-60 grades.
Application: oil-resistant rubber parts
Liquid Silicone Rubber
Series E55FR
Flame Retardent Rubber UL 94V0
Flame-retardant silicone rubber compound for extrusion or molding parts. Used for wire and cable, fire-resistant rubber, and electronic industry applications.
Application: fire-resistant parts
Liquid Silicone Rubber
Series LSR7XX
LSR7XX Injection Molding Silicone Rubber Compound
High-flow liquid injection molding silicone rubber compound for injection molding parts. Intended for automotive, household, and medical industries, and stated as FDA and LFGB grade.
Application: injection molding parts
Liquid Silicone Rubber
Series TLR132A/B
TLR132 Silicone Resin Coating
Non-solvent, two-component liquid silicone resin coating material. Used for high-temperature wire and glass sleeve coating.
Application: high-temperature wire and glass sleeve coating